Precision
Contacts
Sumitomo Fine Cyclo A-Series F1 Type
Unit with high capacity cross roller bearing on output shaft
Combination of zero backlash gearbox and precision cross roller bearing.
- Less than 1 arcmin Lost Motion
- Sizes 45, 65 and 75 provide extremely high support capacity at output shaft
- Fully sealed
- Maintenance free for life (cross roller bearing re-greasing requested on sizes 45, 65 and 75)
- Motor adapter provided on request
Input Shaft Variants:
- Keyway
- Clamp Ring
- Spline
| Zero Mechanical Backlash | |
| Lost Motion | <1 arcmin |
| Number of Sizes | 6 |
| Reduction Ratios | 29:1 / 59:1 / 89:1 / 119:1 / 179:1 (availability depending on size) |
| Nominal Torque | 149 Nm up to 3900 Nm |
| Acceleration Torque | 335 Nm up to 7610 Nm |
| Max. Momentary Peak Torque | 785 Nm up to 24000 Nm |
| Input Speed | up to 6150 rpm |
| Max. Bending Moment | 460 Nm up to 14400 Nm |
| Bending Stiffness | up to 15600 Nm/arcmin |
| Torsional Stiffness | up to 1100 Nm/arcmin |
Key Product Facts
7610 Nm
Acceleration Torque
6150 rpm
Input Speed
1100 Nm/arcmin
Torsional stiffness
Advantages of Fine Cyclo A-Series
Low Hysteresis For Accurate Positioning
Compact Design
High Torsional Stiffness
up to 1100 Nm/arcmin
Small Moments Of Inertia
High Overload Capacity
Emergency Stop Torque up to 24000 Nm
High Efficiency
