Precision
Contacts
Sumitomo E CYCLO – Elastic Cyclo
Shaft gear units with high rigidity for use in the smallest installation spaces
High precision shaft gear with output flange and high rigidity
The new E CYCLO series features high rigidity due to its internal roller bearings. This is significantly higher when compared to the competition. Therefore, the E CYCLO can achieve higher performance in a smaller design envelope and thus lower costs.
- High Rigidity
- Lost Motion 1.0 arcmin
- Transmission error 0.75 arcmin
- Maximum drive speed up to 8500 rpm
- Permissible torques up to 284 Nm
- Radial loads up to 2050 N
- Axial loads up to 3000 N
- Completely sealed including cross roller main bearing
| · No mechanical backlash | |
| Lost Motion | 1.0 arcmin |
| Sizes | 3 |
| Reduction ratios | 50:1 to 100:1 (selectable in all sizes) |
| Nominal output torque | 16 – 67 Nm (at n1 = 2000 rpm) |
| Acceleration torque | 34 – 157 Nm |
| Peak torque for emergency stop | 70 – 284 Nm |
| Output speed | up to 170 rpm |
| Max. axial load | 385 – 483 N |
| Torsional stiffness | up to 15.9 Nm/arcmin |
Key Product Facts
3
sizes
157Nm
Acceleration torque
170 rpm
Output speed
Advantages of the Fine Cyclo E Cyclo Series
Smooth running spikeless gear
Smallest installation space
Ø 74mm – Ø 95mm
Torsional stiffness
up to 15.9 Nm/arcmin
